Modern-day bicycles have become so versatile that they can be used for very many purposes. They are used as a source of employment and for transportation purposes in some areas of the world. Such purposes are more common in developing countries. In more developed nations, they are used more for competition, recreational, and fitness purposes. However, all the aforementioned purposes can only be achieved if proper bicycle tune up is done.
Riders can sustain serious injuries due to poorly maintained bikes. They can also cause injuries to others. Besides injuries, damage can be caused to property, which may cause one to incur huge costs in compensation for damages caused to others. Good maintenance does not only save time and money, but also adds durability to the bike itself and its components. The process of tuning up a bike is quite simple and straight forward for those who daring enough.
Some people do not like jobs that involve manual work like this one. If that is the case, it is advisable to take the bike to any bike shop. Cincinnati has several of such shops open most of the day. Experts working those shops charge reasonably and offer excellent services. A typical job will usually last about thirty minutes to one hour. Tips presented in the paragraphs below can be useful for those who decide to get the job done on their own.
One should prioritize cleanliness because it comes first. Maintenance is made much easier when the bike is already clean because that way, it is half-way maintained already. Cleaning products bought should be environmentally-friendly. There are many biodegradable cleaning agents on the market to choose from. Cassettes, frames, brakes, chains, chain rings, derailleurs, and pedals are among the components that need thorough cleaning.
Cleaning may require dismantling some parts of the bike in order to clean them properly. Such parts ought to be dismounted carefully and cleaned well. Before they are returned, bicycle grease must be applied well. Grease is preferable over oil because it last longer, hence provides protection for a longer period.
The brake system must also be paid attention to. How effectively the brake system can stop the wheels from rotating must be checked. A rotating wheel should be able to be stopped at once when brake levers are pressed. Uneven wearing and damages in the brake pads must be checked too. If necessary, brake pads should be replaced.
The drivetrain should also be checked for efficiency. Normally the force the rider applies on the pedals is transmitted to the rear wheel by the drivetrain. For that reason, it should be serviced and greased effectively. Any loose components must be tightened and replaced whenever it is necessary. The wheels should also be checked to ensure that they are rotating properly and that they are not damaged by brake pads.
Finally, to ensure that no mistakes were made, one should do a test ride. The job cannot be complete the test ride. Some problems may be discovered as one test-rides and if that happens, then they must be fixed before taking the bike out.
Riders can sustain serious injuries due to poorly maintained bikes. They can also cause injuries to others. Besides injuries, damage can be caused to property, which may cause one to incur huge costs in compensation for damages caused to others. Good maintenance does not only save time and money, but also adds durability to the bike itself and its components. The process of tuning up a bike is quite simple and straight forward for those who daring enough.
Some people do not like jobs that involve manual work like this one. If that is the case, it is advisable to take the bike to any bike shop. Cincinnati has several of such shops open most of the day. Experts working those shops charge reasonably and offer excellent services. A typical job will usually last about thirty minutes to one hour. Tips presented in the paragraphs below can be useful for those who decide to get the job done on their own.
One should prioritize cleanliness because it comes first. Maintenance is made much easier when the bike is already clean because that way, it is half-way maintained already. Cleaning products bought should be environmentally-friendly. There are many biodegradable cleaning agents on the market to choose from. Cassettes, frames, brakes, chains, chain rings, derailleurs, and pedals are among the components that need thorough cleaning.
Cleaning may require dismantling some parts of the bike in order to clean them properly. Such parts ought to be dismounted carefully and cleaned well. Before they are returned, bicycle grease must be applied well. Grease is preferable over oil because it last longer, hence provides protection for a longer period.
The brake system must also be paid attention to. How effectively the brake system can stop the wheels from rotating must be checked. A rotating wheel should be able to be stopped at once when brake levers are pressed. Uneven wearing and damages in the brake pads must be checked too. If necessary, brake pads should be replaced.
The drivetrain should also be checked for efficiency. Normally the force the rider applies on the pedals is transmitted to the rear wheel by the drivetrain. For that reason, it should be serviced and greased effectively. Any loose components must be tightened and replaced whenever it is necessary. The wheels should also be checked to ensure that they are rotating properly and that they are not damaged by brake pads.
Finally, to ensure that no mistakes were made, one should do a test ride. The job cannot be complete the test ride. Some problems may be discovered as one test-rides and if that happens, then they must be fixed before taking the bike out.
About the Author:
If you are searching for information about a bicycle tune up, you should pay a visit to our web pages online here today. Additional details are available at http://www.cincybikemedic.com now.